StickMINIGAM

The Minigam panel has been designed for offices where the available height for access floors is limited.

The Minigam panel is classed M0 ( incombustible), and is characterized by a thickness of 19 mm only.
It can be covered with textile tiles used with access flooring, free laid on site.


Le contenu de cette page nécessite une version plus récente d?Adobe Flash Player.

Obtenir le lecteur Adobe Flash

Access floor panel

Bullet3 Composition :
The Minigam panel is made up as follows :
- A mineral core 18 mm thick.
- A steel tray .
- A top steel sheet.

Bullet3 Coverings :
The Minigam panel is available without covering.

Bullet3 Dimensions :
Standard size : 500 mm

Bullet3 Options :

Bullet3 Fire classification:
Minigam panel is classed M0 ( SME/SNPE report nr 14582-09/1 ).

Bullet3 Electrical resistance :
It varies from 5x108 to 2x1012 ohms, depending on the properties of the covering.

Bullet3 Acoustic :
The acoustic insulation measured between 2 adjacent rooms, separated by a densely insulated partition, varies from 47 to 50 dBA, depending on the covering ( Dn,f,w according to Standard NF EN ISO 10848-2).

Bullet3 PDF Download :

France

Bullet3 Print this page : print

Load Classes
  Framework Class Certificate
Minigam
self-supporting
1A ( or 1B or 1C )
nr : 03.10.30.20

Survey Institute : SOCOTEC CONSULTING.
All technical changes reserved without further notice.

NB :A system classed 1A is a system for which the ultimate load is at least 4 kN ( load class 1 ).
The working load of this system is at least 2kN, with a safety factor of 2, for a deflection less than 2.5mm ( deflection class A).
See tables below for the other classes.
   

Load classes according to NF EN 12825
and using safety factor = 2.0

LOAD CLASS 1 2 3 4 5 6
Ultimate load > 4 kN > 6 kN > 8 kN > 9 kN > 10 kN > 12 kN
Working load > 2 kN > 3 kN > 4 kN > 4.5 kN > 5 kN > 6 kN
Deflection class Maximum deflection
A ( the most stringent )
2.5 mm
B 3.0 mm
C ( the least stringent )
4.0 mm