Stick BUROPAC

The Buropac panel has been specially designed for use in offices and computer rooms.

This panel is also recommended for rooms with non-magnetic requirements. It is suitable for all the coverings used with access flooring.


Access floor panel

Bullet3 Composition :
The Buropac panel is made up as follows :
- A high density resin bonded core, thickness 38 mmm.
- A bottom aluminium foil.
- An ABS surround, heat bonded to the edge of the core.

Bullet3 Coverings :
The Buropac panel is available with the following coverings :
- High pressure laminate.
- Vinyl.
- Linoleum.
- Textile
- Rubber.

Bullet3 Dimensions :
Standard size : : 600 mm.

Bullet3 Options :
- Bottom plate of 0.2 mm thick aluminium.
- Top varnished.

Bullet3 Fire classification:
The Buropac panel is classed M1 ( SNPE report nr 15706-12).

Bullet3 Electrical resistance :
It varies from 5x105 to 2x1012ohms, depending on the properties of the covering.

Bullet3 Acoustic :
The acoustic insulation measured between 2 adajacent rooms, separated by a densely insulated partition, varies from 44 to 50 dBA, depending on the covering ( Dn,f,w according to Standard NF EN ISO 10848-2 ).

Bullet3 PDF Download :

France

Bullet3 Print this page : print

Load Classes
  Framework Class Certificate
Buropac
self-supporting
1A (or 1B or 2C )
nr 03.10.30.23
Buropac
stringers 30/15
2A ( or 3B or 4C )
nr 03.10.30.24

Survey Institute : SOCOTEC CONSULTING.
All technical changes reserved without further notice.

NB :A system classed 1A is a system for which the ultimate load is at least 4 kN ( load class 1 ).
The working load of this system is at least 2kN, with a safety factor of 2, for a deflection less than 2.5mm ( deflection class A).
See tables below for the other classes.
   

Load classes according to NF EN 12825
and using safety factor = 2.0

LOAD CLASS 1 2 3 4 5 6
Ultimate load > 4 kN > 6 kN > 8 kN > 9 kN > 10 kN > 12 kN
Working load > 2 kN > 3 kN > 4 kN > 4.5 kN > 5 kN > 6 kN
Deflection class Maximum deflection
A ( the most stringent )
2.5 mm
B 3.0 mm
C ( the least stringent )
4.0 mm