The Burobox M0 panel is widely used in office buildings.

It can be covered with textile tiles used with access flooring, free laid on site.

Access floor panel

Bullet3 Composition :
The Burobox M0 panel is made up as follows :
- A mineral core, 18 to 30 mm thick.
If required, this core may be covered with galvanized steel.

Bullet3 Coverings :
The Burobox M0 panel is available without covering.

Bullet3 Dimensions :
Standard size : 600 mm.
Special size : 675 mm

Bullet3 Options :
- Bottom tray of galvanized steel turning up the sides of the panel.

- Top plate of galvanized steel.

Bullet3 Fire classification:
The Burobox M0 panel is classed M0 (SME report nr 15634-12).

Bullet3 Electrical resistance :
It varies from 5x108 to 2x1012 ohms, depending on the properties of the covering.

Bullet3 Acoustic :
The acoustic insulation measured between 2 adjacent rooms, separated by a densely insulated partition, varies from 49 to 54 dBA, depending on the thickness of the panel and the covering ( Dn,f,w according to Standard NF EN ISO 10848-2).

Bullet3 PDF Download :


Bullet3 Print this page : print

Load Classes
  Framework Class Certificate
Burobox M0
1A to 3A depending on the thickness of the mineral and the steel plates used

Survey Institute : SOCOTEC CONSULTING.
All technical changes reserved without further notice.

NB :A system classed 1A is a system for which the ultimate load is at least 4 kN ( load class 1 ).
The working load of this system is at least 2kN, with a safety factor of 2, for a deflection less than 2.5mm ( deflection class A).
See tables below for the other classes.

Load classes according to NF EN 12825
and using safety factor = 2.0

LOAD CLASS 1 2 3 4 5 6
Ultimate load > 4 kN > 6 kN > 8 kN > 9 kN > 10 kN > 12 kN
Working load > 2 kN > 3 kN > 4 kN > 4.5 kN > 5 kN > 6 kN
Deflection class Maximum deflection
A ( the most stringent )
2.5 mm
B 3.0 mm
C ( the least stringent )
4.0 mm